Powerful Algorithm with No False Alarms
IRT-021-A Flame Detector
Ergonomic and Durable Design
Karf&Scoot IRT-021-A Flame Detector is smaller and lighter than its competitors. Thanks to its stainless steel ex-proof body, it can be used safely in explosive environments. It has a body of only 50mm in diameter and 46mm in length. With its stylish silver-colored design and only 650gr weight, it does not create a bad appearance on the installation site. Its water resistant body allows it to be used indoors and outdoors.
Rapid Response Time
Karf&Scoot IRT-021-A detects the flames in the fastest way up to 50m distances with its 90 ° conical viewing angle thanks to its powerful sensors. It allows you to constantly monitor your entire field with fewer detectors.
The Most Accurate Detection
Karf&Scoot IRT-110-K Flame Detector is equipped with 3 different wavelength infrared sensors to eliminate false alarms. Thanks to its smart algorithm; It is not affected by misleading industrial and environmental factors such as heaters, welding sparks, halogen lamps, sunlight and reflections. Real flames are detected in a very short time and the alarm goes off.
Compliance with International Standards
Karf&Scoot IRT-110-K Flame Detector has ATEX, CE, KFI certificates. It complies with legal requirements and is a product that can be used safely in explosive atmospheres.
|Category||Flame Detector (IR3)|
|Material||Stainless Steel |
|Power||24VDC ±20% (19. ~28.8V)|
|Electric Current||Stand by: 40mA|
|Contact Output||ON / OFF|
|Communication Port||RS-485 / |
4 ~20mA (Optional)
|Operating Temperature||-40°C / +85°C|
|Operating Humidity||0 ~ 95% RH|
|Area of Application||Indoor / Outdoor|
|Explosion Proof||Ex tD A21 IP67 T85°C|
|Ex d IIC T6|